CAM Technology and Products


Read the Full Story

Improving Electing Motor Shops

Improve quality of the motor giving longer life and better reliability

Lower the cost to produce a motor with more efficient methods and new technology

Reduce the time to produce a motor by using better processes and tools

 

Have Questions?

Get In Contact Today

72-YD Power Drive Coil Taping Machine

WatchVideoImprove Taping Consistency While Reducing Operator Strain! 

Operator Friendly, More Ergonomic Coil Taping

This new machine eliminates most of the stress on operators as they move the coil around the tape head. Sturdy, soft rubber drive rollers clamp the coil firmly to support most of the coil weight. They are linked by a ratio controller to the tape head to provide a tight tape wrap with consistent overlap.

Now anybody with just minimal training can produce high quality coil taping results!

Our new Power Drive 72-YD Taping Machine is generating a lot of interest with coil manufacturers that have trouble finding skilled operators to tape their coils manually. With this machine even new operators will produce tight wraps with consistent tape overlap.

Easily Adjustable Ratio Controller

Maintains Overlap No Matter What The Speed!

Simple push button interface lets the operator set whatever tape overlap is desired. No matter how fast the operator makes the tape head go by pressing on the foot pedal, the tape overlap remains perfect.

Bi-Directional Tape Head Speeds Application of Multiple Tape layers

Push a switch and the machine reverses direction to enable your operator to quickly and easily apply another tape layer to the coil. Regardless of the direction the coil is moving, the tape overlap is maintained.

  • Variable Speed Drive
  • Bi-Directional Taping
  • Controlled Overlap
  • Simple to Operate
  • Easy on Operators

 

72-YD Power Drive Spiral Taping Machine

Taping Head Speed 0 to 600 RPM
Number of Tape Rolls One
Inside Ring Diameter 5-11/64” (131.4 mm)
Head Slot Gap 1” (25.4 mm)
Maximum Tape Width 1” (25.4 mm)
Maximum Tape Roll Diameter 6” (152.4 mm)
Maximum Coil Cross Section Size AC Coil - 1” (25.4 mm) x 2” (50.8 mm)

DC Coil - 2” (50.8 mm) x 2” (50.8 mm)
Electrics 115 V, 1 Ph, 60 Hz
Pneumatics 80 PSIG (5.5 kg/cm 2)
Feed Rate Controlled Overlap up to 14 ft/min
 
Machine Dimensions
- Small work table - 36” (914.4 mm) x 24” (609.6 mm) 42” High (1,067 mm)

( Height measurement is to centerline of tape head. Other heights available.)
- Large work table - 60” (1524 mm) x 30” (762.0 mm) 41” High (1,041 mm)

( Table height is adjustable so centerline height can range between 41” (1041.4 mm) to 45” (1143 mm.)
DMC Firewall is developed by Dean Marshall Consultancy Ltd