| 
MACHINE SPECIFICATION
| Capacity: |
20 x 50 mm (3/4” x 2”) maximum
conductor cross-section |
| Tape Widths: |
20 mm (.75”) |
| Tape Tension: |
Adjustable 0.5 kg to 6 kg
(1 – 14 lbs) |
| Tape Spool: |
25.4 mm (1”) core,
110 mm (4.3”) outside |
| Air Supply: |
5,5 Bar pressure (80 psi) |
| Taping Speed: |
Variable up to 240 rpm max. |
| |
|
| Traverse Rate |
|
| Nominal Pitch: |
Up to14 mm per revolution of the tape head |
Distance between coil legs for machine access:
200 mm (8”) minimum |
|
The model BCT unit is specifically designed for the application of tape insulation systems to small motor and generator coils and bars. The coil-taping unit is bench mounted and provides a fast, accurate, and consistent method of operator guided mechanized tape application with virtually no preparation or set up time being required. Unlike other bench taping machines, the BCT 20/50VL DM drives the coil for consistent taping pitch. The adjustable capstans provide constant tape tension over the pad width. The taping head is removable and may be used as a standard BCT 20/50VL suspended taping machine. This feature enables the taping of long narrow coils. The 20/50VL DM taping machine is intended for use with low resin, or encapsulated resin tapes of 20 mm (¾”) widths. These can be applied at a variable overlap (typically ½ & 2/3) over the “in-slot” area and end legs of the coil or bar, in the case of a closed coil the length of covering being limited only by the clearance for machine access. Tape application speed is operator controlled via a foot pedal enabling the operator to confidently negotiate coil bends. A traverse-reversing gearbox, with directional control operated by another foot pedal, enables tape to be applied whilst traversing the work in either or both directions.  |
