CAM Innovation - Transforming Thought into Process and Product
404 - Error: 404
404 - Component not found

You may not be able to visit this page because of:

  1. an out-of-date bookmark/favourite
  2. a search engine that has an out-of-date listing for this site
  3. a mistyped address
  4. you have no access to this page
  5. The requested resource was not found.
  6. An error has occurred while processing your request.

Please try one of the following pages:

If difficulties persist, please contact the System Administrator of this site.

Component not found
Home > Coil Manufacturing Systems > 72-YD & 36-YD Taping Machines
 
404 - Error: 404
404 - Component not found

You may not be able to visit this page because of:

  1. an out-of-date bookmark/favourite
  2. a search engine that has an out-of-date listing for this site
  3. a mistyped address
  4. you have no access to this page
  5. The requested resource was not found.
  6. An error has occurred while processing your request.

Please try one of the following pages:

If difficulties persist, please contact the System Administrator of this site.

Component not found


72-YD & 36-YD Taping Machines
Simple, Reliable, Indispensable!
Variable Speed Coil Taper

For more than 80 years these simple to operate, ingeniously designed machines have been used to wrap tape on armature coils, buss bars, rods, wiring harnesses and even the handles of golf clubs.

Durably constructed of bronze, cast metal and steel, they contain no gears, cams or other complex apparatus. A foot pedal switch controls a variable speed drive unit that rotates the tape head at speeds up to 600 rpms.

These machines rely on the operator to move the work piece through the tape head and maintain the tape overlap. Both the 72-Yard Machine and the 36-Yard Machine can be used to apply adhesive or non-adhesive tape and can be ordered with a standard bench mount or optional floor mount.

Differences in two machinesThe two main differences between the 36 YD and the 72 YD are:

1. Size of the tape roll
2. Size of the tape head opening
Look, No Gears! Taping Machine
No Gears
These machines contain no gears or pulleys and run off a single drive belt. The variable speed drive is mounted below the tabletop.
 Speed
An experienced operator can tape an average of 30 to 60 coils per hour using these machines.
Complete Taping Assembly

A complete taping machine assembly consists of a taping machine with drive motor and control mounted on a steel stand with a 24” (610 mm) X 36” (914 mm) Formica covered table top. Pictured above is a 36-YD machine with an optional coil support fixture that helps the operator position the coil while moving it through the tape head.

Taping Machine

Variable Speed Drive
Simple to Operate
Proven Reliability

BTM
72-Yard Spiral Taping Machine [Model 46220]

Specifications

Taping Head Speed 0 to 600 RPM
Tape Head Size 20-1/2” (520.7 mm) Long
  5-1/16” (128.6 mm) Wide
  12-1/2” (317.5 mm) High
Inside Ring Diameter 5-11/64” (131.4 mm)
Head Slot Gap 1” (25.4 mm)
Maximum Tape Width 1” (25.4 mm)
Maximum Tape Roll Diameter 6” (152.4 mm)
Machine Dimensions (with Table) 36” (914.4 mm) W x 24” (609.8 mm) L x 42” H (1,067 mm)
Shipping Weight of Head 50 lbs. (22.7 kg)
Electrics 115 V, 1 Ph, 60 Hz
 
Mounting Options: Standard Table Mount
  Flush Table Mount
  Floor Stand Mount

72-Yard Spiral Taping Machine Model 46220

36-Yard Spiral Taping Machine [Model 45630]

Specifications

Taping Head Speed 0 to 600 RPM
Tape Head Size 13-11/16” (347.7 mm) Long
  4-11/32” (110.2 mm) Wide
  8-5/8” (219.1 mm) High
Inside Ring Diameter 2-7/8” (73.0 mm)
Head Slot Gap 1” (25.4 mm)
Maximum Tape Width 3/4” (19.1 mm)
Maximum Tape Roll Diameter 3” (76.2 mm)
Machine Dimensions (with Table) 36” (914.4 mm) W x 24” (609.8 mm) L x 42” H (1,067 mm)
Shipping Weight of Head 20 lbs. (9.1 kg)
Electrics 115 V, 1 Ph, 60 Hz
 
Mounting Options: Standard Table Mount
  Flush Table Mount
  Floor Stand Mount

36-Yard Spiral Taping Machine

For complete listing of options and design specifications click this button and fill out this convenient automated form.
CAM Sales Department will reply back to you within 24 hours.


404 - Error: 404
404 - Component not found

You may not be able to visit this page because of:

  1. an out-of-date bookmark/favourite
  2. a search engine that has an out-of-date listing for this site
  3. a mistyped address
  4. you have no access to this page
  5. The requested resource was not found.
  6. An error has occurred while processing your request.

Please try one of the following pages:

If difficulties persist, please contact the System Administrator of this site.

Component not found