 The BCT Taping Machine is specifically designed for the semiautomatic
application of tape insulation systems to motor and
generator coils and bars.
Ease of Operation
The taping head is weightlessly suspended from an overhead
track, providing the operator with a consistent method of guided
mechanical tape application. Tape overlap is controlled and
consistent with virtually no preparation or set up time required.
Total Overlap Control
Pneumatically powered rollers securely clamp on to the coil and
precisely drive the tape head. This enables the BCT to maintain
perfect overlap when running in either a forward or reverse
direction. The amount of tape tension is accurate and adjustable.
 Greater production efficiency
The taping head can apply dry or
resin rich tapes. With its two tape
rolls it is capable of applying two
layers of tape at the same time.
Tape overlap is variable and easily
adjustable for each tape roll. In the
case of a closed coil, the length of
covering is limited only by the
clearance for head access.
Tapes in both directions
A traverse-reversing gearbox,
controlled by a trip switch in the left
handgrip enables the operator to
instantly reverse the taping direction. |
