CAM’s Armature Coil Pulling Station simplifies the process of removing coils from armature’s coil slots. This complete work-station, reduces the need for overhead crane moves while enabling a single worker to safely remove armature coils.

The station consists of three main components: a traction motor sized Armature Stand with “over-the-top” shaft Clamping Device, Pneumatic Cylinder Coil Puller, and Portable I-beam Support Structure.

Strong, Study Armature Support
The stationary armature stand base consists of a heavy steel weldment capable of supporting armatures weighing upwards of 6,500 lb (2948.4 kg). Two heavy standards are mounted onto the base. A hand wheel adjusts the height of the stand’s roller heads and “over-the-top” clamping devices keep the armature in place while the lifting force is applied to the coil being pulled.

Dedicated Work Station - Frees Your Shop Crane!
Once the armature is secured in the stand the Coil Pulling Station’s Portable I-beam Support Structure is wheeled into position for the pulling process. The entire structure is on wheels so it can be moved out of the way to facilitate easy armature loading and unloading. Your shop’s overhead crane is only required to place the armature into the stand and remove it after pulling is complete.

Cushioned Cylinder Dampens Pull Shock
A heavy-duty air cylinder with coil gripping tool assembly is attached to a rod end. As the coil is pulled the trolley-mounted cylinder moves along the I-beam support to absorb the released pull force.