CAM Innovation - Custom Automated Machinery

Armature Winding & Rotation Stands

Heavy Duty, Proven Design

CAM offers more than a dozen stands for armature support and rotation during winding operations. They are robustly-constructed using steel weldments and cast iron support standards. Some stands have wheels for portability and others are designed for stationary support. Maximum weight capacity ranges from 1000 lbs. (453.6 kg) up to 9,000 lbs. (4082.4 kg).

Rotation Brake Options
There are two methods of preventing unwanted armature rotation. Lockable Roller Brakes or Over-the-Top Clamping are standard features on some stands and can be incorporated into most stands as an optional accessory.

Armature Winding and Rotation Stands

Custom Stands
Custom designed stands can be produced for armatures exceeding the capacity of our standard stand models. Tell us about your custom need and our engineers will work with you to design an appropriate and safe support device.

Motor Driven Stands
CAM’s motor driven armature rotation stands are designed to cover a wide range of armatures. The armature is supported on non-conductive rollers and can be used for electrical testing or armature winding. Rollers controlled by a portable footswitch are driven at one end of the stand at a slow speed.

RS Motor Driven Armature Rotation Stand

RS Motor Driven Armature Rotation Stand

AS-S Portable Stand

AS-S Portable Stand

RS Motor Driven Armature Rotation Stand

RS Motor Driven Armature Rotation Stand

Armature Winding & Rotation Stand FEATURES

Armature Winding and Rotation Stands

Over-the-Top Clamping Device keeps armature from rotating during the winding operation.

Armature Winding and Rotation Stands

Roller Locking Brakes can be adjusted to accommodate larger armature shaft diameters.

Armature Winding and Rotation Stands

Standard brass shaft support rollers

Contact Us For a cycle time calculation

Automated Solutions pay for themselves by replacing hours of work with only minutes of work, ask for a cycle time estimate. Fill out the form below and a CAM Representative will be in touch to discuss your needs.

Name(Required)
This field is for validation purposes and should be left unchanged.