RHT is a semi-automatic taping machine designed to spirally wrap tape on harnesses, cables, tubing, pipe and buss bars.

Simple to use, CAM’s RHT Taping Machine combines the precision of automatically controlled overlap with the flexibility to apply one or two layers of any type of tape.

Two Roll Tape Head -- saves time -- doubles productivity!
Adhesive and non adhesive tapes with widths up to 1½ inches can be applied with total accuracy by an RHT machine at tape speeds of up to 14 feet per minute. For even greater productivity, our Dual Head RHT model enables you to apply two layers of tape in a single pass, or a layer of foil and a covering layer of tape simultaneously.

Dual Tape Roll RHT machines
can apply one or two tapes or a
combination of foil and tape.

Push Button Overlap Control
Use the ratio controller to set the overlap and the RHT automatically maintains perfect overlap at any speed. Fast or slow, the tape head turns in time with the powered drive rollers, wrapping the harness with measured precision while pulling the harness through the machine.

Ready to go in just seconds
It takes just seconds to open the guard and change a tape roll, a few more seconds to place your harness through the tape head and engage the pneumatic pressure drive rollers. Then, close the guard and step on the pedal and start taping. It really is that simple.

Installing your new machine is simple, too.
Just place your RHT Taping Machine on a workbench, plug in the electrical cord, attach a pneumatic supply hose, load a roll of tape, and you’re ready to start wrapping.