| DG DGW DGL TU 马达翻转机 |
|
|
|
CAM的 DG 翻转机 设计用于支撑并放置铁路电力机车牵引电机，以进行更快及更有效的电机解体和组装。其骨架由槽钢和角钢组成，覆盖以重型大尺寸钢板。工作台在连接轴上旋转，连接轴是由持久润滑的轴套支撑。防滑花纹钢板在上部覆盖，在工作台在上部位置时形成可以工作的台面。
带有电制动马达的球形螺栓传动装置确保工作台平稳正向运动。
（可选件）安全连锁带将电机工作台架安全的拴在在工作台上。绝对是紧紧地栓在操作台上。
|
操作手柄上有两个按钮，可自行收缩，按两个中的任何一个按钮都会激活控制回路，抬开手以后，按钮缩回，工作台动作立即停止。但如果任一按钮被持续按下，行程开关会将工作台停止在其行程的末端。
|
|
|
|
DGW 电机翻转机
DGW 电机翻转机 为重载型，能够支撑带有轮对，小齿轮及电枢的完整轨道机车牵引电机。垂直工作面张开后，形成大的工作台，台上带有支撑鼻，电机横跨放置在工作台上，电机的 轮子朝向底座上的台阶。这样可方便触到轴端盖、齿轮箱、整个结构的钟形末端，以及电机引出线。台面在90度弧度内旋转，便于对任何件进行检修。
See Data Sheet
|
|
DGL 翻转机
DGL 翻转机 设计处理铁路机车发电机和交流发电机。其能够在维修，绕线或拆装操作时支撑并旋转定子。
See Data Sheet
|
|
TU 电枢翻转机
TU 电枢翻转机 用于解体和装配牵引机车电枢的密封、轴承、止动环及大多数零件。
See Data Sheet
|
|
|
|
| Design Specifications |
|
|
|
BASE MACHINE CAPACITY:
| *Maximum Load Capacity |
7,000 lb (3175.2 kg) |
| Cradle Position Travel |
0° through 90° |
| Time to Rotate Table 90° |
Approx. 40 seconds |
* Rated maximum load capacity when load is confined within table surface.
Load capacity decreases as the load overhang increases on the table.
MACHINE WEIGHTS AND DIMENSIONS:
| Net Weight |
1,145 lb (519.4 kg) |
| Length |
64¼ in (1632.0 mm) |
| Width |
34 in (863.6 mm) |
| Height |
56 in (1422.4 mm) |
CRADLE DIMENSIONS: (table in up position)
| Horizontal Surface: |
|
| Length |
9 5/8 in (752.4 mm) |
|
Width
|
34¾ in (857.4 mm) |
| Vertical Surface: |
|
| Length |
33¾ in (857.4 mm) |
|
Width
|
40 in (1016.0 mm) |
|
|
 ELECTRICS:
Standard machine electrics 230 or 460 V, 3 Ph, 60 Hz.
(For special electric requirements, consult factory.)
- All motors conform to NEMA specifications.
CONTROLS:
Low voltage, overload protected – conform to National Electric Code Specifications.
SHIPPING WEIGHTS AND DIMENSIONS:
|
|
DOMESTIC
|
EXPORT
|
|
Weight
|
1,445 lb (655.4 kg)
|
1,745 lb (791.5 kg)
|
|
Length
|
1 in (1803.4 mm)
|
76 in (1930.4 mm)
|
|
Width
|
42½ in (1079.5 mm)
|
48 in (1219.2 mm)
|
|
Height
|
63 in (1600.2 mm)
|
66 in (1676.4 mm)
|
|
|
|
|
|
BASE MACHINE CAPACITY:
| Maximum Load Capacity |
2,500 lb (1134.0 kg) |
| Cradle Position Travel |
0° through 90° |
| Time to Rotate Table 90° |
Approx. 30 seconds |
MACHINE WEIGHTS AND DIMENSIONS:
| Net Weight |
950 lb (430.9 kg) |
| Length |
43½ in (1104.9 mm) |
| Width |
19 in (482.6 mm) |
| Height |
40 in (1016 mm) |
CRADLE DIMENSIONS :
| Length |
15 in (381.0 mm) |
|
Width OD
|
23 in (584.2 mm) |
| ID |
20 in. (508.0 mm) |
|
|
ELECTRICS:
Standard machine electrics 230 or 460 V, 3 Ph, 60 Hz.
(For special electric requirements, consult factory.)
- All motors conform to NEMA specifications.
CONTROLS:
Low voltage, overload protected – conform to National Electric Code Specifications.
SHIPPING WEIGHTS AND DIMENSIONS:
|
|
DOMESTIC |
EXPORT |
| Weight |
1,150 lb (521.6 kg) |
1,290 lbs (585.1 kg) |
| Length |
53 in (1346.2 mm) |
55 in (1397.0 mm) |
| Width |
27 in (685.8 mm) |
30 in (762.0 mm) |
| Height |
48 in (1219.2 mm) |
50 in (1270.0 mm) |
|
|
|
|
|
BASE MACHINE CAPACITY:
| *Maximum Load Capacity |
12,000 lb (5443.2 kg) |
| Cradle Position Travel |
0° through 90° |
| Time to Rotate Table 90° |
Approx. 1 minute |
* Rated maximum load capacity when load is confined within table surface.
Load capacity decreases as the load overhang increases on the table.
MACHINE WEIGHTS AND DIMENSIONS:
| Net Weight |
3,500 lb (1587.6 kg) |
| Length |
85 in (2159.0 mm) |
| Width |
43 in (1092.2 mm) |
| Height |
63 in (1600.2 mm) |
CRADLE DIMENSIONS: (table in up position)
| Horizontal Surface: |
|
| Length |
37 in (939.8 mm) |
|
Width
|
39 in (990.6 mm) |
| Vertical Surface: |
|
| Length |
39 in (990.6 mm) |
|
Width
|
37 in (939.8 mm) |
|
|
ELECTRICS:
Standard machine electrics 230 or 460 V, 3 Ph, 60 Hz.
(For special electric requirements, consult factory.)
- All motors conform to NEMA specifications.
CONTROLS:
Low voltage, overload protected – conform to National Electric Code Specifications.
SHIPPING WEIGHTS AND DIMENSIONS:
|
DOMESTIC |
EXPORT |
| Weight |
4,000 lb (1814.4 kg) |
5,050 lb (2290.6 kg) |
| Length |
97 in (2436.8 mm) |
106 in (2692.4 mm) |
| Width |
50 in (1270.0 mm) |
63½ in (1612.9 mm) |
| Height |
69½ in (1765.3 mm) |
69½ in (1765.3 mm) |
|
|
|
|
|
BASE MACHINE CAPACITY:
| *Maximum Load Capacity |
15,000 lb (6804.0 kg) |
| Cradle Position Travel |
0° through 90° |
| Time to Rotate Table 90° |
Approx. 1 minute |
* Rated maximum load capacity when load is confined within table surface.
Load capacity decreases as the load overhang increases on the table.
MACHINE WEIGHTS AND DIMENSIONS:
| Net Weight |
3,500 lb (1587.6 kg) |
| Length |
85 in (2159.0 mm) |
| Width |
42¾ in (1085.9 mm |
| Height |
104 7/16 in (2652.7 mm) |
CRADLE DIMENSIONS: (table in up position)
| Horizontal Surface: |
|
| Length |
45 in (1143.0 mm) |
|
Width
|
56 in (1422.4 mm) |
| Vertical Surface: |
|
| Length |
56 in (1422.4 mm) |
|
Width
|
50 in (1270.0 mm) |
|
|
ELECTRICS:
Standard machine electrics 230 or 460 V, 3 Ph, 60 Hz.
(For special electric requirements, consult factory.)
- All motors conform to NEMA specifications.
CONTROLS:
Low voltage, overload protected – conform to National Electric Code Specifications.
SHIPPING WEIGHTS AND DIMENSIONS:
|
|
DOMESTIC |
EXPORT |
| Weight |
3,800 lb (1723.6 kg) |
5,200 lbs (2358.7 kg) |
| Length |
97 in (2463.8 mm) |
106 in (2692.4 mm) |
| Width |
50 in (1270.0 mm) |
63½ in (1612.9 mm) |
| Height |
78 in (1981.2 mm) |
82 in (2082.8 mm) |
|
|
|
For complete listing of options and design specifications click this button and fill out this convenient automated form.
CAM Sales Department will reply back to you within 24 hours.
|
|
|
