Accurate leg radius forming every time- Just program the required radius specifications and the SCA2000 will accurately and consistently form each of the coils need to complete the set.

Each coil precisely shaped for easy nesting during winding - Eliminates tedious and difficult reforming and rework. Eliminates manual hammering to shape the coil

Computer control for simple set-up - Stores set-up data for up to many coil profiles. Provides complete process monitoring and performance feed-back for total quality control

Get a perfect matched Set of Stator Coils in just minutes!

Dimensions

Step 1 – Select the preprogrammed coil loop and finished coil specifications profile from the systems computer.

Step 2 – Place the loop in the machine.

Step 3 – Push start button

The SCA2000 clamps onto the coil’s slot and knuckle while servomotors spread the coil and extend tooling along each leg in order to perfectly shape it to the precise specified dimension. Once programmed, the SCA2000 repeats the process for every coil required for a complete stator set.

Machine Specifications

Note: Power Supply is a Three-phase voltage 50 or 60 Hz. Tooling required for slot clamps, knuckle pins and plates, leg radius forming and coil corner forming.

** Please contact us if inteterested as specifications of the machine may be changed **

Coil Specifications

Before Forming
After Forming

			Minimum	Maximum
L1	Before	Coil Length	600 (23.5”)	2100 (82.5”)
G		Coil Width	50 (2”)	100 (4”)
L2	After	Coil Length	470 (18.5”)	1800 (70.5”)
LS		Slot Length	250 (10”)	1300 (51”)
H		Coil Height	Max. 300 (11.8”)
R		Corner radius	Decision with jigs
W		Slot Width	150 (6”)	700 (27.5”)
1		Eyelet Angle	0o	45o
02/03		Slot Angle	0o	75o
C1×C2		Coil Cross Section	6 x 10 (.24” x .39”)	20 × 50 (.79” x 2”)
LG		Leg Length	140 (5.5”)